Synthesis and characterization of water-soluble C₆₀–peptide conjugates

• Yue Ma,
• Lorenzo Persi and
• Yoko Yamakoshi

Beilstein J. Org. Chem. 2024, 20, 777–786, doi:10.3762/bjoc.20.71

• derivatives by covalently attaching water-soluble moieties to the fullerene core. Subsequently, Nakamura and co-workers further developed reactions between C60 and organocopper reagents, enabling the sequential addition of functional groups to obtain penta- and decaadducts, which largely enhanced the water

Synthesis of photo- and ionochromic N-acylated 2-(aminomethylene)benzo[b]thiophene-3(2Н)-ones with a terminal phenanthroline group

• Vladimir P. Rybalkin,
• Sofiya Yu. Zmeeva,
• Lidiya L. Popova,
• Irina V. Dubonosova,
• Olga Yu. Karlutova,
• Oleg P. Demidov,
• Alexander D. Dubonosov and
• Vladimir A. Bren

Beilstein J. Org. Chem. 2024, 20, 552–560, doi:10.3762/bjoc.20.47

• light and H+ or sequential addition of Fe2+ and AcO− ions. Keywords: fluorescence; molecular switches; N→O acyl rearrangement; naked eye effect; photochromism; Introduction Photochromism is defined as the reversible transformation of a molecular entity between different forms, having different

• sequential addition of Fe2+ and AcO−, we synthesized N-acylated 2-(aminomethylene)benzo[b]thiophene-3(2Н)-ones with a terminal phenanthroline substituent and studied the spectral-luminescent, photochromic and ionochromic properties. The phenanthroline moiety was incorporated into the molecule due to the

• sequential addition of Fe2+ and AcO−. Experimental General The 1H and 13C NMR spectra were recorded on an integrated analytical LC–SPE–NMR–MS system AVANCE-600 (Bruker, 600 MHz for 1H and 150.96 MHz for 13C) in CDCl3. The signals were referred to with respect to the signals of residual protons of deuterated

Iron-catalyzed domino coupling reactions of π-systems

• Austin Pounder and
• William Tam

Beilstein J. Org. Chem. 2021, 17, 2848–2893, doi:10.3762/bjoc.17.196

Selective sulfonylation and isonitrilation of para-quinone methides employing TosMIC as a source of sulfonyl group or isonitrile group

• Chuanhua Qu,
• Run Huang,
• Yong Li,
• Tong Liu,
• Yuan Chen and
• Guiting Song

Beilstein J. Org. Chem. 2021, 17, 2822–2831, doi:10.3762/bjoc.17.193

• is exemplified in Scheme 6C. The sulfonylation reaction starts with ZnI2/base system mediated C–S-bond cleavage of TosMIC derivative 2c to yield Ts anion II, in which 2c acts as the sulfonyl source. Finally, the sulfonylated diarylmethane 3a is formed by a sequential addition/aromatization process

Recent advances in the syntheses of anthracene derivatives

• Giovanni S. Baviera and
• Paulo M. Donate

Beilstein J. Org. Chem. 2021, 17, 2028–2050, doi:10.3762/bjoc.17.131

• brominated naphthalene 153 with PhLi yielded compound 154, which collapsed to naphthotriyne 155 at elevated temperatures. Sequential addition of furan generated the trisadduct 156. Then, dibenz[a,c]anthracene 158 was obtained in good yield (86%) in two steps by hydrogenation of 156 and further dehydration of

Progress and challenges in the synthesis of sequence controlled polysaccharides

• Giulio Fittolani,
• Theodore Tyrikos-Ergas,
• Denisa Vargová,
• Manishkumar A. Chaube and
• Martina Delbianco

Beilstein J. Org. Chem. 2021, 17, 1981–2025, doi:10.3762/bjoc.17.129

Synthetic accesses to biguanide compounds

• Oleksandr Grytsai,
• Cyril Ronco and
• Rachid Benhida

Beilstein J. Org. Chem. 2021, 17, 1001–1040, doi:10.3762/bjoc.17.82

• biguanides by the sequential addition of various primary and secondary aliphatic and aromatic amines to sodium dicyanamide in acidic aqueous alcohol mixtures (Scheme 24). The first addition on the sodium dicyanamide occurred in variable yields depending on the structure of the amine with lower reactivities

Microwave-assisted multicomponent reactions in heterocyclic chemistry and mechanistic aspects

• Shivani Gulati,
• Stephy Elza John and
• Nagula Shankaraiah

Beilstein J. Org. Chem. 2021, 17, 819–865, doi:10.3762/bjoc.17.71

• of MWA-MCR in the construction of fused polycycles with functional diversity for the generation of a library of pharmacologically active molecules. The construction of fused annulated rings are seldomly reported often achieved by a sequential addition approach [40]. Contributing to the same and

Et₃N/DMSO-supported one-pot synthesis of highly fluorescent β-carboline-linked benzothiophenones via sulfur insertion and estimation of the photophysical properties

• Dharmender Singh,
• Vipin Kumar and
• Virender Singh

Beilstein J. Org. Chem. 2020, 16, 1740–1753, doi:10.3762/bjoc.16.146

• of the targeted products was attempted. Therefore, after the formation of the 2-nitrochalcone 1bA, excess of MeOH was decanted, and the crude product was redissolved in 1 mL of DMSO followed by the sequential addition of Et3N (5 equiv) and elemental sulfur (5 equiv). To our pleasure, the reaction at

• the sequential addition of sulfur powder (0.089 g, 2.80 mmol) and Et3N (0.390 mL, 2.80 mmol) at room temperature. The reaction mixture was stirred at 70 °C for 20 min. After completion of the reaction (as analyzed by TLC), the product 2bA was directly purified through column chromatography on silica

Azidophosphonium salt-directed chemoselective synthesis of (E)/(Z)-cinnamyl-1H-triazoles and regiospecific access to bromomethylcoumarins from Morita–Baylis–Hillman adducts

• Soundararajan Karthikeyan,
• Radha Krishnan Shobana,
• Kamarajapurathu Raju Subimol,
• J. Helen Ratna Monica and
• Ayyanoth Karthik Krishna Kumar

Beilstein J. Org. Chem. 2020, 16, 1579–1587, doi:10.3762/bjoc.16.130

• -triazoles Va (Figure 1). At this stage, we sought to analyse the outcome of the proposed reaction following a sequential addition of the reagents utilised for the synthesis of AzPS. Therefore, a preliminary investigation was attempted using the MBH adduct 1a (1 equiv) and propargyl alcohol (2a,1.2 equiv) in

Heterogeneous photocatalysis in flow chemical reactors

• Christopher G. Thomson,
• Ai-Lan Lee and
• Filipe Vilela

Beilstein J. Org. Chem. 2020, 16, 1495–1549, doi:10.3762/bjoc.16.125

Sequential Ugi reaction/base-induced ring closing/IAAC protocol toward triazolobenzodiazepine-fused diketopiperazines and hydantoins

• Robby Vroemans,
• Fante Bamba,
• Jonas Winters,
• Joice Thomas,
• Jeroen Jacobs,
• Luc Van Meervelt,
• Jubi John and
• Wim Dehaen

Beilstein J. Org. Chem. 2018, 14, 626–633, doi:10.3762/bjoc.14.49

• -azidobenzaldehyde (1a), propargylamine (2a), 2-chloroacetic acid (3a) and benzyl isocyanide (4a, Scheme 2). Initially, the condensation of the aldehyde and the amine was effected in MeOH in the presence of 4 Å MS. This was followed by the sequential addition of chloroacetic acid and the isocyanide which, after 24

Gram-scale preparation of negative-type liquid crystals with a CF₂CF₂-carbocycle unit via an improved short-step synthetic protocol

• Tatsuya Kumon,
• Shohei Hashishita,
• Takumi Kida,
• Shigeyuki Yamada,
• Takashi Ishihara and
• Tsutomu Konno

Beilstein J. Org. Chem. 2018, 14, 148–154, doi:10.3762/bjoc.14.10

• -step manipulations for obtaining the CF2CF2-containing multicyclic molecules 1 and 2. Scope and limitation The synthetic route was initiated by the sequential addition–elimination reaction of 4-n-propylphenylmagnesium bromide (4-n-PrC6H4MgBr) with commercially available dimethyl tetrafluorosuccinate (7

The chemistry and biology of mycolactones

• Matthias Gehringer and
• Karl-Heinz Altmann

Beilstein J. Org. Chem. 2017, 13, 1596–1660, doi:10.3762/bjoc.13.159

Copper-catalyzed asymmetric conjugate addition of organometallic reagents to extended Michael acceptors

• Thibault E. Schmid,
• Sammy Drissi-Amraoui,
• Christophe Crévisy,
• Olivier Baslé and
• Marc Mauduit

Beilstein J. Org. Chem. 2015, 11, 2418–2434, doi:10.3762/bjoc.11.263

• ; sequential addition; Introduction Amongst the variety of synthetic methods available for the formation of C–C or C–heteroatom bonds, the asymmetric conjugate addition (ACA) of nucleophiles to electron-deficient alkenes is one of the most relevant and versatile for the synthesis of complex chiral molecules

Synthesis and evaluation of the biostability and cell compatibility of novel conjugates of nucleobase, peptidic epitope, and saccharide

• Dan Yuan,
• Xuewen Du,
• Junfeng Shi,
• Ning Zhou,
• Abdulgader Ahmed Baoum,
• Khalid Omar Al Footy,
• Khadija Omar Badahdah and
• Bing Xu

Beilstein J. Org. Chem. 2015, 11, 1352–1359, doi:10.3762/bjoc.11.145

• repeating the removal of the Fmoc group and sequential addition of Fmoc-Thr(t-Bu)-OH, Fmoc-Thr(t-Bu)-OH and thymine-1-acetic acid. For the final step of the SPPS, we used 2,2,2-trifluoroethanol/dichloromethane (TFE/DCM 2:8) to cleave the fully protected NA from the resin. For conjugates 5–8, we cleaved the

Chiroptical properties of 1,3-diphenylallene-anchored tetrathiafulvalene and its polymer synthesis

• Masashi Hasegawa,
• Junta Endo,
• Seiya Iwata,
• Toshiaki Shimasaki and
• Yasuhiro Mazaki

Beilstein J. Org. Chem. 2015, 11, 972–979, doi:10.3762/bjoc.11.109

• structures of 3 in various redox states, cationic species of 32+ and 34+ were prepared by their reaction with an adequate amount of Fe(ClO4)3, as the oxidant, in a MeCN/CH2Cl2 (v/v = 1:4) solution (Figure 5a). During the sequential addition of between 0 to 2 equivalents of the oxidant, no isosbestic point

• species of PTDPA were also produced by the sequential addition of Fe(ClO4)3 (Figure 5b). During the oxidation, three phases of PTDPA-(0), PTDPA-(+1), and PTDPA-(+2), corresponding to the oxidation stages involving TTF, TTF•+, and TTF2+, respectively, were observed during the oxidation. The spectrum of the

Synthesis of the furo[2,3-b]chromene ring system of hyperaspindols A and B

• Danielle L. Paterson and
• David Barker

Beilstein J. Org. Chem. 2015, 11, 265–270, doi:10.3762/bjoc.11.29

• methylenedioxyphenyl groups in ketone 8 would be added by sequential addition of aryllithiates to both the carbonyl and aldehyde groups, derived from the terminal alkene, of a homoallylic carboxylic acid derivative 9. Our route to ketone 8 began from salicylaldehyde (10) which underwent a Horner–Wadsworth–Emmons

Multicomponent reactions in nucleoside chemistry

• Mariola Koszytkowska-Stawińska and
• Włodzimierz Buchowicz

Beilstein J. Org. Chem. 2014, 10, 1706–1732, doi:10.3762/bjoc.10.179

• reported reaction sequence. Ghosh and Kass synthesized nucleosides 119 from 2,3-dihydrofurane 117, ethyl pyruvate, and the silylated nucleobase 118 (Scheme 49) [126]. This method does not strictly comply with the Ugi’s definition of MCRs because of the sequential addition of the substrates. However, in our

Synthesis of homo- and heteromultivalent carbohydrate-functionalized oligo(amidoamines) using novel glyco-building blocks

• Felix Wojcik,
• Sinaida Lel,
• Alexander G. O’Brien,
• Peter H. Seeberger and
• Laura Hartmann

Beilstein J. Org. Chem. 2013, 9, 2395–2403, doi:10.3762/bjoc.9.276

• branched) [18] and biocompatible with a decreased risk of inherent immunogenicity [19]. Recently, we showed that monodisperse, sequence-defined glycooligomers obtained by sequential addition of building blocks on solid support are valuable tools for tuning and understanding carbohydrate–lectin interactions

Development of an additive-controlled, SmI₂-mediated stereoselective sequence: Telescoped spirocyclisation, lactone reduction and Peterson elimination

• Brice Sautier,
• Karl D. Collins and
• David J. Procter

Beilstein J. Org. Chem. 2013, 9, 1443–1447, doi:10.3762/bjoc.9.163

• manuscript, we report studies on SmI2-mediated cyclisation and lactone reduction that culminate in a “telescoped” sequence, i.e., a sequence of steps carried out on a single reaction mixture by the sequential addition of various reagents. In the sequence, additives are used with SmI2 to “switch on

Construction of cyclic enones via gold-catalyzed oxygen transfer reactions

• Leping Liu,
• Bo Xu and
• Gerald B. Hammond

Beilstein J. Org. Chem. 2011, 7, 606–614, doi:10.3762/bjoc.7.71

• rearrangement of alkynyl arylaldehydes 13 to benzoxepinones 14 with good regioselectivity (Scheme 11) [47]. This transformation was effectively promoted by the addition of benzyl alcohol and the sequential addition of p-toluenesulfonic acid. However, in the absence of p-toluenesulfonic acid, benzyl ether 15 was

One-pot gold-catalyzed synthesis of 3-silylethynyl indoles from unprotected o-alkynylanilines

• Jonathan P. Brand,
• Clara Chevalley and
• Jérôme Waser

Beilstein J. Org. Chem. 2011, 7, 565–569, doi:10.3762/bjoc.7.65

• . Importantly, this transformation did not require prior aniline protection and proceeded under mild conditions. This methodology represents the first example of the sequential addition of Au(III) and Au(I) catalysts for a one-pot process. Experimental General procedure for the synthesis of 2-alkynylanilines 2

CuCl-catalyzed aerobic oxidation of 2,3-allenols to 1,2-allenic ketones with 1:1 combination of phenanthroline and bipyridine as ligands

• Shuxu Gao,
• Yu Liu and
• Shengming Ma

Beilstein J. Org. Chem. 2011, 7, 396–403, doi:10.3762/bjoc.7.51

• was purged with air and refilled with oxygen (twice). Then 1.5 mL of dry toluene was added, the resulting mixture was stirred at rt for 0.5 h which was followed by the sequential addition of DBAD (14.0 mg, 0.06 mmol), 2-hexyl-1-butylbuta-2,3-dien-1-ol (63.8 mg, 0.3 mmol) and 1.5 mL of dry toluene

Synthesis and crossover reaction of TEMPO containing block copolymer via ROMP

• Olubummo Adekunle,
• Susanne Tanner and
• Wolfgang H. Binder

Beilstein J. Org. Chem. 2010, 6, No. 59, doi:10.3762/bjoc.6.59

• times. Block copolymer syntheses The synthesis of block copolymers (An-b-Tn) was carried out analogously to methods developed previously in our laboratory [14][16]. For example the synthesis of BCP-A50T50 was performed by sequential addition of monomers. Monomer A 7 (15 mg, 0.071 mmol) dissolved in 1 ml